DIY: Hotel Transylvania Party
August 29, 2014
There are two little munchkins who I adore, and are the daughters of dear friends. The past 3 or so years, I have made the invitations for their birthday parties, and some other decorations, favors, or whatever needs to be made. Last year Munchkin Number 1, wanted a Hotel Transylvania themed birthday party. Since her birthday is in October, her parents decided to make it a costume party complete with a haunted house (which the Munchkins, nor I, would enter).
Here is the Invitation I made for that party.
The card was cut using Cricut Over The Hill Cartridge at 5 1/2"
The base is a Bazill cardstock in Nelly
The gate and bat are Recollections black shimmer cardstock.
The bat is cut from Cricut Batman cartridge (I can't remember the exact name, sorry) on page 33 at 3 1/3"
and attached using an adhesive foam square to add dimension.
The information was printed on Recollections white cardstock with 2 different fonts since her mom and I couldn't decide on one.
|Felt Bats ready to be applied to bags.|
I cut a bunch of circles in two different sizes from craft felt, by hand, then glued the pieces together and added googly/wiggle eyes. These were then glued onto those snap-type barrettes (purchased at the Dollar Tree). These were spread out on the tables at the party for guests to wear in their hair.
The banner was cut using the Cricut Over The Hill cartridge using the same paper as the invitations plus a gray for the overlay. The letters were cut using the Cricut Mickey and Friends cartridge.
The chandelier was cut using a Cricut Summer in Paris cartridge 3D option at the largest size I could get on a 12x12 sheet. The cardstock is a heavy black glitter on one side and plain white on the other. I cut the two pieces required for the 3D effect, then used the "flip" option on the Cricut machine and cut two more pieces. I matched the pieces and glue them together so that all sides would have the black glittler. I hung these using a wire spring which I made using .22 gauge floral wire I had on hand. I wrapped the wire tightly around a wooden dowel I also had on hand. I liked the bouncy/floating movement they had.
|Step 1: of making spring wire - Wrap around the dowel several times|
|Step 2: Scrunch the links/rows together tightly, twisting the links around the dowel if necessary.|